Rodney Dickman's Vehicle Accessories

 
 

Corvette / GM HEI

Replacement Tachometer Filters

NEW! Choose OEM-Look or Custom-Look

Replaces GM Part Number 14020025

Fits 1974-1989 Corvette and most 1974-1989 GM vehicles with HEI distributor.

    NEW OEM Look!

    • Cures "Dead Tach". If your tachometer doesn't function, you may have a defective tach filter

    • May cure a tach that is randomly jumping due to a slowly corroding tach filter

    • Bolts in place of the original tach filter which is no longer available from GM

    • Easy installation, excellent instructions included.

    • Similar Original Appearancel! Just attach your old harness ends, and plug in.

     

    Custom- Look also available!

    • Cures same problems as OEM-Look unit above

    • Completely replaces the original tach filter which is no longer available from GM

    • Easy installation. Excellent instructions included

    • Allows you to remove the "cylindrical" tach filter from your engine compartment, and hide this new replacement in the wiring loom

    • Clean up that engine compartment look!

    New replacement tachometer filters for 1974-1989 Chevrolet Corvettes, and many other 1974-1989 GM vehicles. Replaces GM Part Number 14020025, which is discontinued. Should fit most small/big block V8 (283/327/350/383/400/427/454/502) with HEI from 74-89..

     

     

    New Original Equipment Look Now Available!!
    I have had a lot of requests for these over the years, especially for the new improved OEM look cylinder!

    Pricing
         
      Description Item Cost
      OEM-Look Tach Filter
    $5.00 S&H*
    		$49.00
      Custom-Look Tach Filter
    $5.00 S&H*
    		$20.00

* WI residents please add  5% sales tax.  Order multiple items and save on shipping.

I accept VISA, MASTERCARD, PAYPAL, CHECK, and MONEYORDER. 

To order, 

Soon, you may order online on my  www.rodneydickman.com Fiero site.

Just click on the "Fiero" page link, and then look in the "Electrical" section.

For Now

E-Mail me at:    rodney1@execpc.com

Or

Call: Rodney Dickman's Vehicle Accessories.  (262) 835-9575

Or

Send Check or Money Order to:

Rodney Dickman

7604 Treeview Drive

Caledonia, WI. 53108

 

*Checks may delay shipping by 7-10 days, or until the check clears the bank.  Money Orders ship immediately.

Q: How do I know when I need to replace the tachometer filter?

A: Many times the tach filters on GM cars corrode/disintegrate over time.  If your tach seems to jump all over the place randomly, you may need to replace the tach filter.  Or, if your tach is not functional at all, you may need to replace the tach filter.  Take a look in the engine compartment, and see. Many times the wires to this filter are corroded, missing, or the tach filter itself looks as if it's melting.  In many cases, my replacement tach filter fixes this problem.

Q: Where is the tach filter located?

A: The tach filter is circled in the picture below.  It's a small (usually black or grey) canister with a wire coming from each end.

Q: How do I install my OEM-look replacement tach filter?


A:  Installation is a simple procedure. Simply unbolt the old tach filter, disconnect the ends from the old tach filter, connect the old ends to the new tach filter, bolt in place, and plug in. If you prefer, you can wire the replacement directly in by cutting and splicing the wires.

 

Q: Why would I want the custom-look filter instead of the OEM-Look model?

A:  The custom-look filter is designed for the Corvette owner that wants to save a few dollars and clean up their engine compartment appearance. My custom-look tach filter is very tiny and can be hidden inside a wire harness loom. Simply disconnect the old filter, plug or splice the new wires in place, and hide it under the nearest wire loom. You won't even remember it is there... except when you look at your tach gage, and see it works!

 

Q: How do I install my custom-look replacement tach filter?

A:  Installation is a simple procedure. Simply disconnect the ends from the old tach filter, and wire mine directly in. You can cut and splice the wires if you prefer and then even "hide" the replacement as I explained above.

As with all my products, excellent rebuild instructions are included with every order.

QUESTIONS? E-Mail me

Headlight fix Fiero Headlight parts Headlights headlight gears. Headlight Headlight Motor Headlight Motors gears Headlight Repair Headlight Repair Parts headlight gear headlight gears   headlight repair headlight motors headlight repair headlight motors Headlight Fix Headlight Fix Headlight Fix

Take a look here for my links page. If I sell it, you can find it here!

http://my.execpc.com/~rodney1/products/index.htm