Evolution EndLinkstm

Top Stories

Car Mag Opinion full story...

Links to Discussions full story...

 

 

EvolutionTM EndLinks

The Future of Vehicle Suspension

Welcome to the evolution of the modern day end- link.

For over 50 years, the standard sway bar end link has been used. A combination of a through-bolt, a sleeve, nut, and a few rubber bushings. Billions of research dollars, thousands of vehicles later, and the suspension end-link has never changed.. Until now.

<Place Animated Gif here of end link evolving into "Evolution Link>

These state of the art end links are a direct replacement for the sway bar end links on many cars and trucks from the 1950s to modern production automobles. No longer do you have to settle for the "cushy" rubber, or the squeaking polyurethane. Evolution Endlinks offer a solid steel connection between your sway bar and your control arm. A unique ball and socket design only allows at much movement as required, keeping your vehicle securely planted to the road. There is no rubber to "give." Welcome to the evolution.

These are ball and socket end links manufactured using the highest quality ball joints available. They are pre-lubed at the factory, and require absolutely no maintenance. Just install and hit the road.


Simply measure the length your old end link sleeve, and compare them to the chart below.

 
Evolution End Link Sizing
Overall Length does not include studs.

Overall Length

Metric

Overall Length

Inch

Comparable Sleeve Length -Inch
84mm 3 5/16" 1 1/2"
91mm 3 5/8" 2"
100mm 4" 2 1/2"
112mm 4 3/8" 2 7/8"
128mm 5" 3 1/2"
136mm 5 3/8" 3 7/8"
148mm 5 7/8" 4 3/8"
154mm 6 1/8" 4 5/16"

TO FIT/SELECT THE PROPER SET-
Vehicle must be on level ground (not jacked up). The wheels must be supporting the full vehicle weight. Make sure the stabilizer or sway bar eyelet end is parallel with the control arm. Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the original. Measure sleeve length and add 1 1/2" or 38mm. This will give you the correct sizing for the Evolution End Links. Compare to the chart to find the correct set that will fit your application. Please contact me for any off-sizes you may require.

   
     

Price.. $43.00 pair


To order,

E-Mail me at: rodney1@execpc.com

Or Call:

Rodney Dickman's Vehicle Accessories. (262) 835-9575

Or Send Check or Money Order to:

Rodney Dickman

7604 Treeview Drive

Caledonia, WI. 53108

*Checks may delay shipping by 7-10 days, or until the check clears the bank. Money Orders ship immediately.

 

 

About Us | Site Map | Privacy Policy | Contact Us | ©2005 Rodney Dickman Corporation