# Sample EnergyMech configuration file
# v2.8.2 - MadCamel
#
# Note - Lines starting with '#' are comments and ignored by the bot.

##### Linking #####
# EnergyMechs can link(-help LINK) to one another to perform such features
# as DCC PartyLine, Remote Command Execution (-help CMD), and Ops/Protection
# (Add linked bots to eachother at level 200). This section is optional,
# bots running in the same config file are automaticly linked.

# Entity Name: In order to link to other bots, your bot must
#              have a unique entity name. -CHANGE THIS-
#ENTITY        emech

# Link Password: A password for linking. -CHANGE THIS-
#LINKPASS      abc123

# Link Port: A port the bot will listen on for linking, telnet, 
#            and pipeuser(http://www.energymech.net/docs/pipeuser.html)
#            This has to be above 1024, and some firewalls, noteably
#            IP Masquerade/NAT may block this.
#LINKPORT      49152

# An example link configuration, here you have an ENTITY called ``hismech'' 
# and its LINKPASS  is ``a1b2c3''. It is running on ``mech.host.net'' and
# it's LINKPORT is 49152.
#LINK          hismech a1b2c3 mech.host.net 49152

# Another example, the entity ``hermech'' is not listening on any port
# (missing or non-working LINKPORT in config), so it does not matter
# what host it is on as well, thus "0 0" at the end(-help LINK).
#LINK          hermech abcdefg 0 0

# Automatic Linking: Uncomment this to enable auto-linking. This will
#                    cause the mech to try and link to all bots in it's
#                    list, until all are present.
#AUTOLINK

##### Server List ####
# Some undernet servers to connect to... You can use server names is you wish, 
# but putting the IP's here instead of host names speeds up connects (alot).
# Servers are global, all mechs in the same process uses the same server list.
#
SERVER 64.235.225.250 6667
SERVER 64.235.225.250 7000
SERVER 195.197.175.21 6667
SERVER 195.197.175.21 7000
SERVER 193.110.95.1 6667
SERVER 193.110.95.1 7000
SERVER 193.109.122.67 6667
SERVER 193.109.122.67 7000

##### Bot 1 Configuration #####
# In EnergyMech, you can have multiple bots on IRC from the same config
# file/process. Traditionaly, the spawn command was used, however, that 
# command has been removed in 2.8.2 and above due to abuse. You can still
# specify more than one bot in the config file as shown.

# Nick for the bot.
NICK           Bacchante 

# The file we use to store the userlist. Note you will have to generate
# this with a command such as ./genuser emech.users
USERFILE       1.users

# All commands begin with this character.
CMDCHAR       -

# Register on IRC with this username (emech@xxxxxxxx). Note that if your
# machine is running identd, it will always be your username.
LOGIN         theo 

# Display this in the "Real Name" field
IRCNAME       thEOmai Networks Property  

# User modes for the bot
MODES         +xi-ws

# If you want to run the bot on a virtual host, uncomment
# the below line and set it.
#VIRTUAL       my.silly.vanity.domain.com

# If you compiled with SEEN support and decide not to use it, uncomment this.
#NOSEEN

# Channel-Independant toggles and sets. See the -REPORT command for a full
# listing.
HASONOTICE		# Yes for Undernet.
TOG CC          1       # We want the bot to require command character
TOG CLOAK       1       # Ignore CTCP's from non-users? Yes.
TOG SPY         1       # Tell who is executing what in the partyline.
SET OPMODES     6       # How many modes in a line? 6 on undernet...
SET BANMODES    6       # How many bans in a line? 6 on undernet...
SET CTIMEOUT    90      # Server connection timeout
SET CDELAY      30      # Delay between connection attempts

# Basic channel setup. You can have as many of these as your server
# supports. See the -REPORT command for a listing.
CHANNEL         #pswy      # Channel name
TOG PUB         1       # Allow public(in-channel) commands? Yes.
TOG MASS        1       # Do mass-mode/kick/ban checks...
TOG SHIT        1       # Activate the shitlist for this channel
TOG PROT        1       # Activate protection of users
TOG ENFM        0       # Dont enforce channel modes.
SET MDL         7       # How many -o before killing the guy?
SET MKL         7       # How many kicks?
SET MBL         7       # And how many Bans?
SET MPL         1       # What to do with massmoders?
#                       0 = nothing,
#                       1 = kick the bastard,
#                       2 = kickban 'em,
#                       3 = kickban & shitlist them.
##### END BOT 1 #####

##### Bot 2 Configuration #####
NICK          Heretique 
USERFILE      2.users  # No two bots can have the same user file.
CMDCHAR       -
LOGIN         mai 
IRCNAME       thEOmai Networks Property 
MODES         +ix-ws
#VIRTUAL       my.other.silly.vanity.domain.com
#NOSEEN

HASONOTICE
TOG CC         1
TOG CLOAK      1
TOG SPY        1
SET OPMODES    6
SET BANMODES   6
SET CTIMEOUT   90
SET CDELAY     30

CHANNEL        #pswy 
TOG PUB        1
TOG MASS       1
TOG SHIT       1
TOG PROT       1
TOG ENFM       0
SET MDL        7
SET MKL        7
SET MBL        7
SET MPL        1
##### END BOT 2 #####

# There are lots of people who do not edit their configuration
# file. This is here just to keep you paying attention.
# Comment it out.
# DIE You forgot to edit your configuration file...