200 LIME SOLV  200 Lime Solv is a combination of organic and inorganic acids, wetting agents and inhibitors for use in the final clean up of new masonry.  200 Lime Solv efficiently cleans off residual mortar, jobsite soiling, staining and efflorescence.  It is best and most economical on red and dark colored brick, concrete block and varieties of new masonry construction not susceptible to metallic staining.  Will not discolor or damage the surface - safer and more controllable than muriatic acid.

202 NEW MASONRY DETERGENT  A more productive New Masonry Detergent with a combination of organic and inorganic acids, wetting agents and inhibitors for the professional use in final clean up of new masonry.  202 New Masonry Detergent efficiently cleans off residual mortar, jobsite soiling, staining and efflorescence it will work on brick stone, tile, exposed aggregate and several varieties of new masonry construction not susceptible to metallic staining.  Will not discolor or damage the surface - safer and more controllable than muriatic acid.

202V VANA-STOP NEW MASONRY  202V Vana-Stop is a productive combination of organic and inorganic acids, wetting agents and inhibitors for use in the professional clean up of new masonry.  It is specifically formulated for cleaning new brick and stone subject to iron, vanadium, manganese, molybdenum and other metallic stains.  202V Vana-Stop efficiently cleans off residual mortar efflorescence, job site soiling and staining.  It will work on brick natural and synthetic stone, tile, exposed aggregate and several varieties of new masonry construction susceptible to metallic staining.  Cleaning with 202V Vana-Stop greatly reduces the likelihood of a staining occurrence, thereby eliminating costly recleaning and stain removal

Tan, pinks, glazed brick, structural tile, exposed aggregate, general masonry surfaces

LIMITATIONS:  All traces of excess mortar/grout, efflorescence and other construction stains shall be removed from exposed masonry surfaces.  New masonry cleaners are not generally effective in removing atmospheric grim and carbon found on older masonry.  See Diedrich Restoration Products Section.

Red and other dark brick

Soft burned white, gray or brown and all other brick subject to metallic staining,
colored CMUs & mortar.

TEST PROCEDURES:  A test patch approximately 4 x 4 ft. is required to be cleaned prior to full scale operations.  The test areas are necessary to determine compatibility and required end results.
Individual masonry types must be tested.  Inspection of the test areas should occur after a 3 to 7 day dry time.  The patch should be available for the architect to inspect and approve, then remain as the standard for the project.

    1-800-323-3565 Toll Free * 414-764-6993 * e-mail:  diedtech@execpc.com       
            Previous Page                                 Home Page                              Next Page