300 WATER-BASED SILOXANE (VOC COMPLIANT) Diedrich 300 Series Water-based, penetrating, breathable polysiloxane materials, specially formulated for use on sandstone, pre-cast and concrete surfaces where surface darkening is unacceptable.  Diedrich 300 Series Water Repellents reduce bonding of airborne dirt and hydrocarbons; water damage caused by freeze/thaw cycles is reduced.  Provides protection against efflorescence and exhibits excellent resistance to ultraviolet rays.

303S SILOXSEAL SILOXANE WATER REPELLENT  Diedrich 303S Series Products are formulated to protect against the intrusion of moisture that causes efflorescence, leaching, mildew, atmospheric staining and freeze/thaw spalling.  The 303-S Series has an excellent resistance to the detrimental effects of acid rain, alkalis, and carbon buildups.  303-S products are ideal for applications to concrete flatwork, parking ramps, stadiums and vertical concrete surfaces because the migration of chloride ions through the cement is reduced, thus reducing the corrosion and deterioration of rebars in reinforced concrete.  Diedrich 303-S Series Products are formulated for low-pressure spray application to masonry, concrete, stucco, sandstone. Available in 7%, 10% and 15% siloxane solids.  LIMITATIONS:  May not be suitable for application to some types of natural stone, limestone and marble.  May not be suitable for surfaces to receive surface paints or coatings:  always test for compatibility, apply above 20 degrees F.  Temperature extenders added for year around cold weather application.

1-800-323-3565 Toll Free  *  Fax 414-764-6993  *  E-Mail:  diedtech@execpc.com

      Previous Page                          Home Page                                  Next Page