Call: 414-327-1555
 
POTTER & BRUMFIELD KHA series GENERAL PURPOSE DRY CIRCUIT TO 5A MULTICONTACT AC OR DC RELAY File E22575 File LR15734 
 · Miniature size from 2 pole to 4 pole. A 5 pole version is available as a special order. · KHS hermetically sealed version UL Approved for Class 1 Division 2 hazardous locations. · Various applications include process control, photocopier, and data processing. · Low cost, semiautomated construction. 
Arrangements:   2 Form C (DPDT), 4 Form C (4PDT).
Expected Life: 10 million operations, mechanical; 100,000 operations min.
               at rated loads. Ratings are based on tests of relays with
               ungrounded frames.
Initial Breakdown Voltage: 500V rms, 60 Hz., between open contacts.
                           1240V rms, 60 Hz., between all other elements.
Contact                                Resistive Rating
Code     Material                  Minimum          Maximum
1        Silver                    100mA @          3A @   
                                   12VAC/12VDC      120VAC/28VDC
2*       Silver-cadmium            500mA @          5A @
         oxide                     12VAC/12VDC      120VAC/28VDC
3        Gold-silver-nickel        10mA @           2A @
                                   12VAC/12VDC      120VAC/28VDC
4        Palladium                 100mA @          3A @
                                   12VAC/12VDC      120VAC/28VDC
5        Silver alloy              500mA @          3A @
                                   12VAC/12VDC      120VAC/28VDC
6        Bifurcated cross bar,     Dry circuit      1A @
         gold overlay silver                        120VAC/28VDC           
                      
8        Gold diffused silver      50ma @           3A @
                                   12VAC/12VDC      120VAC/28VDC          
Note: Relays should only carry a maximum of 15 amps continuously
for all poles combined. KHS hermetically sealed version maximum rating
is 5A @ 120VAC/28VDC. 
 
Voltage: From 6 to 120V DC, and 6 to 240V AC, 50/60 Hz.
Nom. Power: DC coils - 0.9 watt; 0.5 watt minimum operate @ 25degree C.
            AC coils - 1.2 VA; 0.55 VA minimum operate @ 25 degree C. 
Max. Power: DC coils - 2.0 watts @ 25 degree C.
Duty Cycle: Continuous.
Initial Breakdown Voltage: 500V rms, 60 Hz.
|               DC Coils                      |         AC Coils           |
                Resistance      Nominal         Resistance      Nominal 
Nominal         in Ohms         Inductance      in Ohms         AC Current
Voltage         +/-10% @        in Henrys       +/-15%          in mA
                25 degree C
  5                32             .072
  6                40             .08              10.5         200   
 12               160             .28              43           100   
 24               650            1.0              160            52   
 48             2,600            4.5              668            25   
 90             9,000           13.5
 110*          11,000           17.0
 120*          13,500           --              3,900            11.0 
 240                                           12,000             6.0 
*Note: For 220 and 240VDC, use series dropping 5W resistor of 11,000
ohm. 
 
Must-Operate Voltage: DC: 75% of nominal voltage.
                      AC: 85% of nominal voltage.
Operate Time: 13 milliseconds typical @ nominal voltage (excluding bounce).
            
Release Time:  6 milliseconds typical @ nominal voltage (excluding bounce).
Temperature Range: -45 degree C to +70 degree C operate. 
                   -60 degree C to +130 degree C storage.
Mountings: #3-48 stud, sockets with printed circuit or solder terminals,
           or bracket plate with #6-32 threaded stud.
Termination: Printed circuit or solder/socket terminals.
             Printed circuit terminals are available for KHS on a special
             order basis.
Insulating Material: Molded high-dielectric material.
Enclosures: See Ordering Information table.
            Cover colors are available in black, red, blue, yellow and
            green by special order.
Weight: 1.6 oz. approx. (45 g)
(approx. 83 & 95K .gifs @ 750 pixels wide). BUILD YOUR OWN PART NUMBER: A 75K graphic (GIF) of Ordering Information. This information will 'build' a part number from a list of available specifications.  | 
![]()  | 
Call: 414-327-1555 Fax : 414-327-0577 Email: iebyross@yahoo.com Catalog, Quote, Availability. Industrial Electronics By Ross LLC  |